Home Current News Argentina’s ATENEA Completes Its Artemis II Technology Demonstration

Argentina’s ATENEA Completes Its Artemis II Technology Demonstration

Argentina’s ATENEA microsatellite completed its planned operating period after launching with Artemis II on April 1, 2026. In an April 8 mission report, Argentina’s national space agency, CONAE, said the spacecraft returned telemetry from more than 70,000 kilometers away and finished approximately 20 hours of operations on April 2.

ATENEA separated about five hours after launch, switched on its onboard computer, and began stabilizing its orientation. Ground stations in Córdoba, Tierra del Fuego, and La Plata received its first telemetry simultaneously, with technical support from Vietnam’s Hoa Lac station.

CONAE reported that communications, power, thermal control, and attitude control performed as expected during this phase. The satellite’s battery remained fully charged during the Argentine visibility period. The returned records included information about radiation, electronics, communications, navigation signals, and low-light sensors.

Testing Equipment Beyond the Navigation Constellations

ATENEA is a 12-unit CubeSat developed by an Argentine team led by CONAE. Its technology-demonstration program combined university-built equipment with commercially available spacecraft components.

The National University of La Plata developed the structure, onboard computer, communications equipment, and satellite-navigation receiver. Argentina’s National Atomic Energy Commission supplied the solar panels. Other participants included the National University of San Martín, the University of Buenos Aires Faculty of Engineering, the Argentine Institute of Radio Astronomy, and VENG.

One experiment was designed to receive Global Positioning System signals above the navigation constellation itself. Another compared radiation measurements under different shielding conditions. The LabOSat miniature laboratory carried radiation sensors and tested a silicon photomultiplier, a detector designed to measure very low levels of light.

The satellite also tested long-distance radio links. Its communications system used S-band radio to receive commands and transmit spacecraft-health information and payload data. Successful decoding at the mission’s maximum planned distance was a principal operating objective.

ATENEA used the standardized CubeSat approach to place these experiments inside a compact spacecraft. Its short operating period was part of the experimental design, and the flight supplied records for subsequent engineering analysis.

The ground operation also supported neighboring missions. Argentina reported receiving signals from Germany’s TACHELES and South Korea’s K-RadCube at Tierra del Fuego and providing those recordings to the responsible teams. CONAE’s announced follow-up work was the analysis of ATENEA’s telemetry and instrument data.

ATENEA flight duration, distant telemetry reception, and technology experiments.
Exit mobile version
×