Commercial aviation uses satellite navigation to determine aircraft position and support the routes and procedures flown by suitably equipped aircraft. The U.S. Federal Aviation Administration identifies Global Navigation Satellite Systems (GNSS) as a basis for area-navigation and required-navigation-performance operations across phases of flight.
The commercial application combines signals from space with aircraft equipment, monitoring functions, and published procedures. An airline buys and operates the onboard capability, and air navigation services establish the routes and infrastructure within which it is used. The resulting system connects position measurements with a defined flight operation.
Connecting Aircraft Position With a Defined Route
A satellite receiver calculates position from received radio signals. The aircraft’s navigation systems relate that position to its intended flight path. The operational purpose is to determine where the aircraft is in relation to the route or procedure being flown.
The FAA’s satellite navigation program describes how performance-based navigation supports flexible point-to-point routes and parallel tracks. It also identifies more precise tracking in terminal airspace as a means of improving how that airspace is used.
This changes the relationship between navigation infrastructure and route design. Routes can be defined around navigation performance and geographic waypoints rather than being determined only by the locations of individual ground radio aids.
For a commercial operator, the relevant capability is the approved navigation function within the aircraft’s operating environment. Position measurement becomes part of a route that is supported by the installed equipment and the applicable procedure.
Understanding RNAV and RNP
Area Navigation, abbreviated RNAV, allows aircraft to follow paths defined within the coverage or capability of their navigation systems. Required Navigation Performance, abbreviated RNP, adds onboard performance monitoring and alerting.
The FAA’s performance-based navigation explanation describes these as navigation specifications with associated aircraft and aircrew requirements. Their numerical designations express lateral accuracy in nautical miles for the specified proportion of flight time.
The distinction concerns more than the precision of a position display. RNP includes a mechanism for monitoring whether the required navigation performance is being maintained. The aircraft supplies an alert when the relevant performance conditions are not met.
These specifications also explain why aircraft capabilities differ between procedures. A navigation installation is approved for particular functions and operating conditions. The applicable specification connects the aircraft’s equipment and operational arrangements with the intended use of the airspace.
Monitoring the Position Solution
Aviation positioning includes a property called integrity: the ability to provide a timely warning when navigation information is unsuitable for the intended operation. The equipment evaluates information about the position solution as well as calculating the position itself.
The FAA’s navigation-aids documentation describes Receiver Autonomous Integrity Monitoring, or RAIM. This is a receiver-based function that checks the consistency of satellite measurements.
Additional observations provide redundancy for detecting a possible problem. Some receiver arrangements also support fault detection and exclusion, which can identify and remove a faulty measurement from the position calculation.
Integrity monitoring is a defined part of the navigation service. It gives the aircraft information about the suitability of its position solution for the phase of flight. The resulting alerts belong to the operational system used by the crew.
Adding Wide-Area Corrections
The Wide Area Augmentation System, known as WAAS, supplements GPS for aviation and other users in its service region. The FAA’s WAAS technical explanation describes a network of surveyed reference stations that receives GPS signals.
Because the reference-station locations are known, the system can identify errors in the received measurements. Master stations process the observations and generate messages containing correction and integrity information.
Those messages are sent to geostationary satellites for broadcast to compatible receivers. The aircraft processes the augmentation message as part of its position estimation. Ground monitoring and space-based distribution contribute to the same service.
The architecture separates measurement, processing, and distribution. Reference stations observe the satellite signals; processing facilities calculate the augmentation information; the broadcast delivers that information across a region. Aircraft equipment uses the result without requiring a separate local correction installation at every destination.
Supporting European Aviation With EGNOS
Europe’s regional augmentation system is the European Geostationary Navigation Overlay Service, or EGNOS. It combines ground monitoring stations, central processing, and broadcasts through geostationary satellites.
The system improves GPS-based positioning and provides integrity information within its defined service area. Its aviation role is implemented through the Safety of Life service and compatible aircraft equipment.
The European Union Agency for the Space Programme describes the Safety of Life service as openly accessible without a direct service charge. It supports operations including Localizer Performance with Vertical Guidance, abbreviated LPV.
Vertical guidance gives the approach a defined descent path in addition to lateral guidance. The service makes that capability available through the combination of the augmentation signal, approved avionics, and the published approach.
This has an infrastructure consequence for smaller airports. EGNOS can support approach guidance where a conventional ground-based landing aid is not installed. The commercial aviation application is access to a supported approach procedure at the destination, using the appropriate aircraft capability.
Providing Local Corrections at an Airport
A Ground Based Augmentation System, abbreviated GBAS, provides augmentation in the vicinity of an airport. The FAA’s GBAS system description identifies local reference receivers, processing equipment, and a very-high-frequency data broadcast.
The ground facility compares received GPS measurements with the known positions of its reference antennas. It then broadcasts corrections and integrity information to aircraft equipped to use the service.
The broadcast also carries approach-path information. The aircraft combines these inputs with its own satellite observations to support the GBAS Landing System, known as GLS.
This is a different distribution arrangement from a regional satellite-based augmentation service. GBAS delivers local information through an airport-area radio broadcast. Its ground installation and compatible aircraft receiver form the operational connection.
The FAA’s airport infrastructure description notes that a single GBAS facility can support multiple runway ends. That creates an airport equipment market alongside the market for onboard avionics.
Integrating Navigation Equipment
Commercial avionics manufacturers combine several navigation functions within installed equipment. Honeywell’s Integrated Multi-Mode Receiver brings together GPS, instrument landing system, GLS, and VHF radio-navigation functions.
This arrangement places satellite and conventional navigation capabilities within one receiver architecture. The aircraft installation can support more than one type of navigation service through integrated hardware.
The commercial product includes the equipment and its supported functions. Airline and aircraft-manufacturer decisions concern how that equipment fits the aircraft’s avionics architecture and intended operations.
Aviation is one application within the GNSS commercial market, with value attached to approved equipment and operational integration.
Connecting Capability With Airport Access
Approach capability has a direct operational meaning for an airline: it can change which published procedures are available to a suitably equipped aircraft. The FAA’s WAAS benefits account describes commercial use of LPV approaches to reach intended destinations under applicable conditions.
The agency includes an account from Horizon explaining that completing an arrival instead of diverting keeps passengers at their intended destination and avoids the associated diversion expense. This identifies a specific mechanism behind the commercial value of approach capability.
The benefit is linked to an operating result rather than to receiver precision alone. The aircraft, crew, service availability, and published procedure together determine the operation that can be performed.
The FAA maintains information about GPS and WAAS approaches and incorporates new procedures through its aeronautical publication process. Published approach information connects the available navigation capability with a particular airport and runway.
