---
title: "NASA Seeks AERONET Photometer Suppliers for Satellite Data Validation"
id: 227325
type: "post"
slug: "nasa-aeronet-photometer-suppliers-rfi-2026"
author: "NSE"
published: "2026-11-20T14:41:09+00:00"
modified: "2026-11-20T14:12:45+00:00"
canonical: "https://newspaceeconomy.ca/2026/11/20/nasa-aeronet-photometer-suppliers-rfi-2026/"
markdown_url: "https://newspaceeconomy.ca/2026/11/20/nasa-aeronet-photometer-suppliers-rfi-2026.md"
description: "NASA Goddard is seeking U.S. suppliers of photometers and replacement parts for AERONET, with capability statements due December 1, 2026."
language: "en-US"
category:
  - "Current News"
  - "Space Economy"
post_tag:
  - "Earth Observation Satellites"
  - "Government Procurement"
  - "NASA"
  - "NASA Solicitation"
  - "Procurement"
---

# NASA Seeks AERONET Photometer Suppliers for Satellite Data Validation

[NASA](https://www.nasa.gov/) Goddard Space Flight Center issued a revised request for information on November 19, 2026, seeking U.S. suppliers of AERONET photometers and replacement parts. The instruments support a ground measurement network used to check satellite observations of atmospheric aerosols and maintain long-term records.

The request concerns an installed base of more than 600 CE318-series photometers at land, ocean, and ship sites worldwide. [NASA](https://www.nasa.gov/) is gathering supplier capability information to determine its acquisition strategy and the level of competition for a future procurement.

Responses to [notice 80GSFC27Q0008](https://sam.gov/opp/c73d0d4ec5d94f1d8a556efe980d05e1/view) are due December 1, 2026, at 4 p.m. Eastern. The attached RFI identifies itself as Revision 1, dated November 19. This stage is market research for the proposed purchase of instruments and parts.

## Ground Measurements Behind Satellite Observations

AERONET, the Aerosol Robotic Network, measures how particles in the atmosphere affect light. Its photometers observe direct sunlight, moonlight, and light scattered through the sky. The measurements allow researchers to derive aerosol optical properties and the amount of water vapor along the observed atmospheric path.

Satellites infer atmospheric properties from radiation detected by their instruments. A ground network provides measurements that researchers can compare with those satellite-derived results. Matching the observations helps scientists evaluate the satellite data products used to study atmospheric particles.

The procurement’s [statement of work](https://sam.gov/api/prod/opps/v3/opportunities/resources/files/2fd06ae060f74fc8a99f5467d5f490fb/download) places this function within [NASA](https://www.nasa.gov/)’s Earth science calibration and validation activities. The network also supplies a consistent record for studying aerosol properties over time, rather than only during a particular satellite mission.

A published account of the [DSCOVR science team’s work](https://newspaceeconomy.ca/2025/02/14/summary-of-the-10th-dscovr-epic-and-nistar-science-team-meeting/) describes one such application: researchers compared aerosol measurements from the EPIC instrument with AERONET observations. That comparison illustrates the direct connection between the ground instruments and evaluation of satellite products.

Consistency across stations is part of the measurement process. NASA’s requirements address calibration, observing procedures, data formats, and processing so measurements from additional instruments can be combined with the existing record.

## Compatibility With the Installed Network

The [revised request for information](https://sam.gov/api/prod/opps/v3/opportunities/resources/files/5d6066ed5ea940df94c083d85212fef6/download) seeks instruments in standard, polarization, and ocean-color configurations. The proposed equipment must operate with existing site infrastructure, including the tracking robots that point sensors toward the required observing directions.

NASA asks suppliers offering instruments outside the CE318 series to explain how their measurements would remain compatible with the AERONET record. The RFI identifies side-by-side calibration results or experience in AERONET or a similar federated network as examples of relevant supporting information.

Replacement components must also fit and function in the deployed CE318-series fleet. The requested parts include detector and sensor electronics, filters, modems, robot hardware, and motor assemblies. Supplying these components supports the operation of instruments already in the field as well as the addition of new units.

The statement of work describes a system in which a microprocessor controls pointing, filter selection, data storage, and transmission. Different spectral filters isolate particular wavelength bands. Automated pointing and programmed observation sequences allow a station to collect repeatable measurements without an operator manually directing every observation.

## Remote Operation and Data Delivery

The RFI specifies automatic measurements spanning wavelengths of 340 to 1640 nanometers, covering ultraviolet light through the short-wave infrared. It also calls for a signal-to-noise ratio above 10,000 to one on all channels. These are proposed instrument requirements for suppliers to address in their capability statements.

Communication options include the NOAA satellite Data Collection System, worldwide cellular connections supporting 4G and 5G, and computer or internet links. Onboard storage and multiple transmission methods support the movement of measurements from field locations into the network’s processing system.

NASA specifies battery operation with charging from five-watt solar panels. The proposed instruments must be sealed against rain, humidity, dust, and smoke and operate at temperatures between minus 20 and 50 degrees Celsius. These specifications reflect the field conditions identified in the procurement documents.

Lunar observations extend the measurement approach beyond daylight. The instruments measure direct lunar irradiance alongside solar and diffuse sky observations. That capability forms part of the requested equipment’s compatibility with the network’s established measurement methods.

## U.S. Supplier Capability Statements

The revised RFI invites responses from U.S. manufacturers, authorized distributors, and other U.S. firms. NASA will check company status against incorporation and physical-address information in the government’s System for Award Management. The document includes small businesses in the eligible supplier groups.

NASA asks respondents to identify the manufacturer and country of manufacture of the equipment they would supply, explain how it meets the technical requirements, and describe their ability to provide compatible replacement parts. It also requests relevant supply experience from the preceding five years and information about applicable government purchasing arrangements.

Capability statements are limited to 10 pages, including attachments. NASA will use the responses in deciding the acquisition approach, including whether a small-business set-aside is appropriate. The next announced step is receipt of those statements by the December 1 deadline.

![NASA AERONET supplier request covering photometers, compatible replacement parts, satellite validation, and the December response deadline.](https://i0.wp.com/newspaceeconomy.ca/wp-content/uploads/2026/11/nasa-aeronet-suppliers-2026.png?resize=696%2C464&ssl=1)
