Commercial shipping uses Global Navigation Satellite Systems (GNSS) to connect vessel movements with electronic charts, traffic information, and equipment control. Inside a container terminal, the same positioning technology connects cargo-handling machines with records of where containers were collected and deposited. The commercial service changes across these settings, but the underlying measurement remains a position associated with a time.
A ship operator needs a geographic reference for a voyage. A terminal operator needs to associate a container move with a particular storage location. Suppliers build different systems around those requirements, combining satellite receivers with communications, software, and other sensors.
Connecting a Vessel to Its Chart
A marine GNSS receiver calculates the position of its antenna using signals from navigation satellites. GPS is one satellite constellation within GNSS; compatible receivers can also use other constellations. The resulting coordinates become an input to the vessel’s bridge equipment.
An Electronic Chart Display and Information System, or ECDIS, combines chart information with positioning and other navigation data. The International Maritime Organization describes electronic chart systems as equipment used to plan and display routes and monitor a vessel’s progress. The chart supplies information about the waterway, and the positioning system supplies the vessel’s changing location.
These are separate commercial products. Chart producers maintain geographic information. Equipment manufacturers supply displays and interfaces. Installers connect sensors, and service providers support the equipment during its working life. A ship’s satellite receiver participates in this larger bridge system.
The UK Maritime and Coastguard Agency’s guidance on electronic navigation equipment explains that ECDIS receives information from GNSS, a gyrocompass, and a speed-and-distance log. These instruments contribute different measurements. GNSS position locates the vessel geographically; heading describes its orientation; speed information describes its movement.
Antenna location also has practical meaning. A receiver measures where its antenna is installed, which can be some distance from the vessel’s center or another point used by bridge equipment. Configured offsets connect the sensor position to the vessel geometry. On a large ship, that distinction becomes part of displaying the hull in relation to a berth or channel.
Sharing Position With Other Ships
The Automatic Identification System, or AIS, broadcasts vessel information over maritime radio. According to the Canadian Coast Guard’s AIS explanation, the transmitted information includes identity, position, course, speed, and voyage-related details.
GNSS and AIS perform different jobs. The satellite receiver obtains a position from signals arriving from space. The AIS equipment communicates vessel information to other receivers. A ship appearing on another vessel’s display involves both the measurement and the radio transmission.
AIS information can appear on electronic charts, radar displays, and portable pilot units. Connecting a named vessel with a reported position helps users interpret traffic movements. The identity attached to a location is commercially useful because shipping operations concern particular vessels and voyages, rather than anonymous moving points.
The Coast Guard also describes calculations of closest point of approach and the time until that approach. Those calculations use reported movement information to describe how vessels are moving relative to one another. They illustrate how positioning becomes an input to another function rather than the final product presented to the user.
Holding a Working Position
Some commercial vessels use positioning information to remain near a selected location during offshore work. A dynamic positioning system combines sensors, control software, and propulsion equipment to control position and heading automatically.
Kongsberg Maritime describes dynamic positioning applications on offshore support vessels, construction vessels, research vessels, and drillships. The control system issues commands to thrusters to counter movement. Satellite positioning supplies a geographic reference within the equipment arrangement.
This application gives position a different role from its role on a chart. The measurement enters a control process that changes the vessel’s physical movement. The commercial installation includes propulsion interfaces and control equipment as well as positioning sensors.
Relative positioning serves another operational purpose. Kongsberg’s DARPS 232 system is designed for offshore loading between vessels such as a shuttle tanker and a floating production or storage vessel. It exchanges positioning information by radio and calculates distance and bearing between the participating vessels.
The system can account for the separation between antennas and selected loading points. That connects the measured geometry to the places where the operation occurs. The relevant output is the relationship between working points on two vessels, not simply two independent latitude-and-longitude readings.
Recording Container Moves
Inside a terminal, satellite positioning can connect the movement of a cargo-handling machine with an inventory event. A straddle carrier moves over a container, lifts it, transports it, and sets it down. Sensors identify the handling events, and positioning equipment associates them with locations.
Septentrio’s account of PSA Antwerp’s positioning system describes receiver units developed by MGB-Tech for straddle carriers. Sensors detect collection and deposit events, and container locations are transmitted to the customer’s backend system.
This arrangement records container movements through the equipment performing them. It does not require every container in the described workflow to calculate and report its own satellite position. The terminal software combines the handling event with the machine’s measured location.
That connection explains the commercial value of the installation. A terminal’s inventory record becomes associated with an observed physical transfer. The system links equipment activity with cargo location, supporting subsequent retrieval and movement.
The receiver is one element of the finished product. MGB-Tech supplies an application-specific unit, Septentrio supplies positioning technology, and the terminal connects the results with its operational software. Each organization contributes a different part of the service delivered to the cargo operator.
Position and Orientation in the Yard
Terminal equipment sometimes needs orientation as well as location. A stationary vehicle can occupy a known position without its direction being apparent from movement. Dual-antenna equipment uses the spatial relationship between antennas to determine heading.
Camco’s cargo-equipment location technology incorporates two GNSS receivers and antennas in a terminal positioning unit. The company describes heading information for parked terminal trucks and straddle carriers. Its system also receives correction messages from a GNSS base station.
Camco combines satellite positioning with ultra-wideband radio equipment for alignment beneath ship-to-shore cranes. Fixed radio anchors on a crane communicate with equipment on a vehicle to calculate its location in that working area. The terminal application uses measurements suited to each part of the handling operation.
Other installations combine GNSS with inertial sensors, which measure motion. Septentrio describes GNSS and inertial integration for terminal vehicles, including maintaining position estimates during brief periods beneath structures. The integrated output supplies the equipment’s location through successive portions of its route.
The Commercial Product Around the Measurement
Shipping and port applications show why the market extends beyond selling receivers. Vessel installations connect measurements to bridge displays or propulsion control. Terminal installations connect them to cargo events and equipment records. New Space Economy’s GNSS market analysis places these services within the wider commercial market for positioning technology.
The paid product can include equipment, installation, correction services, software integration, and ongoing support. What the customer receives is a working relationship between a measured position and a business process.
At sea, that relationship can place a vessel on its electronic chart or describe its separation from another working vessel. In a terminal, it can update the recorded location of a container at the moment a handling machine deposits it.
