HomeMarket Data And AnalysisHow Commercial Drones Use GNSS to Deliver Paid Services

How Commercial Drones Use GNSS to Deliver Paid Services

Commercial drones use Global Navigation Satellite Systems (GNSS) to support planned flights and associate collected data with geographic locations. A drone operator can use those capabilities to produce a site map, measure a stockpile, or record inspection imagery against a particular asset. The customer receives information about the site or equipment being examined.

Positioning contributes at two stages. During collection, it helps the aircraft follow the planned operation. During processing, recorded positions help place images and other observations within a geographic reference. The resulting service combines the aircraft, its sensors, and processing software with the operator’s fieldwork.

Following a Planned Collection Route

A mapping flight follows a collection plan designed for the area being measured. DJI’s Mavic 3 Enterprise manual describes area and linear flight routes for aerial photogrammetry. The operator defines the collection area and configures the flight in the planning application.

An area route organizes coverage of a site. A linear route follows an elongated area. In both cases, the flight plan connects geographic boundaries with the camera’s collection task.

The planned route gives the operation a repeatable structure. The aircraft follows the configured coverage pattern as it collects the images used in the final product. Positioning is one input to the aircraft’s control system, and the planned camera operation determines which observations are collected along the route.

The distinction between flying and measuring is visible in the planning settings. Flight coverage concerns where the aircraft travels. Image collection concerns the views needed to reconstruct or inspect the target. A commercial mapping job coordinates both.

Connecting Photographs With Geographic Coordinates

Photogrammetry derives measurements and three-dimensional information from photographs. Aerial mapping software compares overlapping views of the same features to reconstruct their relationships. Geographic information then places that reconstruction in a coordinate system.

Pix4D’s image-acquisition documentation describes the relationship between flight paths, image overlap, flight height, and camera settings. It also explains that images can be georeferenced using recorded GPS positions or more precise positioning workflows.

Georeferencing connects the image project with locations outside the photographs themselves. The resulting map can be associated with the site’s geographic setting rather than existing only as a separate visual model.

This is part of the service delivered to a customer. A photograph shows the appearance of a surface. A georeferenced map or model allows that surface to be examined in relation to known positions and other project information.

Applying RTK and PPK Corrections

Two common high-precision workflows are real-time kinematic positioning, abbreviated RTK, and post-processed kinematic positioning, abbreviated PPK. Pix4D’s workflow documentation distinguishes them by when GNSS corrections are applied.

RTK applies corrections during collection. PPK combines recorded observations with reference data after the flight to calculate corrected positions. Both support more precise image-location information than a basic standalone positioning workflow.

The timing of the correction process changes how the project is handled. Real-time corrections become available during the operation. Post-processing creates corrected position records afterward, which can then be supplied to the image-processing application.

Pix4D states that its PIX4Dmatic PPK workflow uses corrections completed in separate software before import. This separates the calculation of corrected GNSS positions from the photogrammetric reconstruction itself. The operator supplies the images and their corrected location information to the mapping process.

Establishing the Map’s Geographic Reference

Ground control points provide known coordinates that can be identified in the imagery. Pix4D’s control-point documentation describes points measured using surveying equipment, including GNSS receivers and total stations.

The processing software uses ground control to place the project within its geographic reference. Checkpoints have a different role: they are retained for assessing the completed model rather than used to fit it.

That distinction separates the reference used to build a result from the observations used to evaluate it. A point marked as control influences the reconstruction. A checkpoint supplies a comparison between the model and an independently measured location.

Pix4D also distinguishes relative and absolute accuracy. Relative accuracy concerns the relationships within the reconstructed project. Absolute accuracy concerns agreement with the project’s geographic reference.

For commercial customers, these describe different properties of a deliverable. Measurements within a model address the geometry of the site. Its geographic placement determines how it aligns with other location-based records. Ground control, image-position information, and checkpoint comparisons contribute to documenting those properties.

Measuring Stockpiled Materials

Stockpile measurement turns an aerial model into an inventory-related quantity. DroneDeploy’s volume measurement documentation describes selecting a boundary around a pile and calculating the volume between the modeled surface and a defined base.

The base represents the surface beneath the material. The upper surface comes from the mapped pile. The volume calculation measures the space between them within the selected boundary.

This explains the respective roles of positioning and analysis. GNSS helps locate the collection and its observations. Photogrammetry reconstructs the surface. The volume tool calculates a quantity from the reconstructed geometry and the selected base.

The customer-facing output can be a measurement associated with a named stockpile. The service converts a set of aerial observations into a record that can be used in site reporting or inventory management.

Producing Agricultural Maps

Agricultural drone services combine positioning with cameras that record crop information. Pix4D’s vegetation-index workflow describes creating a field map from multispectral imagery and generating a vegetation index.

A multispectral camera records separate wavelength bands. The software combines selected bands to calculate an index across the mapped area. GNSS supplies geographic information associated with collection, allowing the result to be related to positions in the field.

The map can then support geographically defined application zones. Pix4D describes producing a machine-readable map that combines locations with application-rate values for use by a tractor terminal or spraying drone.

This creates a link between aerial observation and agricultural machinery. The drone collects imagery, processing organizes the measurements into a field map, and the exported information identifies where a specified application rate belongs. The location reference connects the observation with the subsequent operation.

Organizing Infrastructure Inspections

Inspection services use a planned collection process to examine particular equipment or structures. DJI’s solar inspection workflow describes planning routes over a solar installation and collecting visible and thermal imagery.

Thermal imagery records information related to surface temperature. Visible images provide a different view of the same installation. The inspection workflow associates the collected observations with the planned route and the equipment being examined.

DJI describes importing inspection imagery into analysis tools to examine components and maintenance-related findings. The commercial service combines the collection with interpretation of the relevant sensor data.

Saved routes also give repeated inspections an established collection pattern. The operator can return to a planned mission and collect another set of observations. Positioning helps connect that repeat operation with the same physical site.

Drone services sit within the wider GNSS applications market because positioning is embedded in the collection and delivery process.

Delivering Measurements and Inspection Records

The final deliverable organizes observations into information the customer can use. DroneDeploy’s annotation-report documentation describes reports containing map annotations and measurements, including location, distance, area, and volume.

The report can carry a selected measurement together with its mapped setting. Customers can receive a printable record, exported data, or a view-only link, depending on the chosen workflow.

This connects the flight with the contracted information product. The aircraft collects observations, positioning supplies geographic references, and software produces a map or model. The final report records the selected measurements and annotations against the site that was surveyed or inspected.

Infographic explaining drone flight routes, georeferencing, RTK and PPK corrections, ground control, measurements, and inspection records.
YOU MIGHT LIKE

WEEKLY NEWSLETTER

Subscribe to our weekly newsletter. Sent every Monday morning. Quickly scan summaries of all articles published in the previous week.

Most Popular

Featured

FAST FACTS