The European Space Agency and OHB System signed a contract worth more than €102 million on November 17, 2026, to build ClearSpace-1, a spacecraft intended to capture an aging satellite and guide it into atmospheric reentry. The agreement, signed at Space Tech Expo Europe in Bremen, Germany, starts the mission’s construction phase.
ESA’s construction announcement identifies a planned launch in 2030. The target is the agency’s Proba-1 satellite after the end of its operational life. OHB leads the industrial team, with ClearSpace, Indra and OHB Sweden participating in the work.
The award moves the project from design into construction of the flight spacecraft. It finances a specific mission to reach an existing satellite, establish physical control over it and dispose of both vehicles together. ESA is the customer for that demonstration, with industrial companies supplying the spacecraft and its mission technologies.
Capturing a Satellite Built Without Servicing Interfaces
Proba-1 was launched in 2001. ESA’s mission description gives its mass as 95 kilograms and its dimensions as approximately 0.6 by 0.6 by 0.8 meters. The planned removal system uses four robotic arms.
The satellite was not designed to receive a servicing vehicle. That makes the encounter different from docking with a spacecraft equipped with a matching docking port and able to help control the approach. ClearSpace-1 is being designed to work with the target’s existing structure and motion.
According to OHB’s contract announcement, optical and radio-frequency sensors will measure the target’s orientation, rotation and movement relative to the approaching spacecraft. Those measurements will support an autonomous rendezvous and capture sequence.
The distinction between orbital position and relative motion matters during capture. Both spacecraft will be traveling around Earth, but the servicing vehicle must approach the target slowly enough to make controlled contact. Its observations must also account for the way the satellite turns, because the surfaces available for capture move with that rotation.
After capture, the planned mission will direct the combined spacecraft into a controlled atmospheric reentry. This disposal maneuver is the final physical intervention: the target is removed from orbit along with the vehicle that captured it.
A Revised Target and an Industrial Construction Phase
The current design follows a change in the object selected for removal. ClearSpace-1 originally targeted a VESPA payload adapter. OHB says that object was damaged in a 2023 collision with space debris, leading the mission to be redesigned around Proba-1. The project completed its pre-development phase in March 2025.
The target change affects the engineering task. A payload adapter and a satellite have different shapes and structural features. The close-approach observations and capture equipment must correspond to the object actually encountered in orbit.
New Space Economy’s earlier coverage of debris-removal service contracts explains how public agencies purchase an intervention involving an identified object. The new ESA agreement puts that purchasing model into a defined construction phase: an agency funds industrial work tied to a named spacecraft and a disposal mission.
The industrial responsibility extends beyond manufacturing a capture device. The removal spacecraft must travel to the target, determine its behavior and control the combined system after attachment. Those functions join spacecraft propulsion and flight control with the sensors and mechanisms used near the target.
ESA says the OHB-led team will now turn the ClearSpace-1 design into flight hardware for the planned 2030 launch.


